Do you have a robot vacuum cleaner in your house? Have you thought that such a tiny robot may be upgraded to measure and map indoor environment quality (e.g., temperature, pollutants)?
Our team recently embedded a few environmental quality sensors on an open-source robot and developed algorithms to make the robot “smarter” for indoor air quality measurement and mapping.
<iframe width=”560″ height=”315″ src=”https://www.youtube.com/embed/fKgOLoSQxTE” frameborder=”0″ gesture=”media” allowfullscreen></iframe>
It may not only move around to vacuum dust on the carpet, but also measures and
Indoor environmental quality (IEQ) is a critical aspect of the built environment to ensure occupant health, comfort, well-being and productivity. Existing IEQ monitoring approaches rely on sensor networks deployed at selected locations to collect environmental measurements, and are limited in scale and adaptability due to infrastructure cost and maintenance requirement. To enable high-granularity IEQ monitoring with agile adaption to the dynamic indoor environment, we propose an “automated mobile sensing” system that dispatches a sensor-rich navigation-capable robot to actively survey the indoor space. Data collected in this fashion is sparse in the joint temporal and spatial domain, and cannot be used directly for IEQ evaluation. To deal with this special characteristics, we developed a spatio-temporal interpolation algorithm to capture the global trend and local variation in order to use the data efficiently to reconstruct the IEQ dynamics. We compared the performance of the automated mobile sensing with a dense sensor network in a laboratory where we measured the air-change effectiveness (ASHRAE standard 129) for four different conditions. Results indicate that automated mobile sensing is able to accurately estimate the parameters with a minimal sensor cost and calibration effort. Potential applications of this system include indoor thermal comfort, lighting, indoor air quality and acoustic monitoring, pollutant source identification, and building commissioning. We shared publicly the source codes for robot control, sensor setup, and interpolation algorithm to encourage comparison study and further development.
You must be logged in to post a comment.